Costco Kirkland Signature 9.0 (Product Information)

The battery size is unchanged. Just adds the t-coil feature, and a slightly larger housing.

Bob,
Can you provide us with your source and cost on that remote?

@Raudrive said:

The top 7 programs are available to select as manual programs.

Very helpful - thanks.

Thank you, Thom.
I thought mine were set up for long press on the top button to mute, but now I am not sure. Also, how is that distinguishable from a long press used to switch programs?

Sure thing Nate - £145 from Crystal Hearing in the UK

I don’t have any inside info, but I found this link

Which appears to be the updated users guide, and it shows that the KS9 T will have a 312 battery.

I notice that I have to change my batteries on my new Costco KS9s much more often than on my old Rextons (same size batt). I attribute this to the use of BlueTooth on the RS9s. How can I dissable BlueTooth and only use it when necessary or desired? With this improve battery life on my KS9s?

I am sorry to hear this. It would be absolutely handy.
Thanks for giving it a try.

@WestEndBob said:

but whatever I tried, I can’t make them pair.

Do they need to be paired up in the software first, as this was the case with the older Phonak models.

From what I can tell they connect in quite a different way to the old Phonak remotes with the Belong/Brio 3 models. The instructions to pair with the Marvel aids are a simple Bluetooth pairing procedure, without any need to link to the aids using Target. There is no port on the remote, so you can’t connect it to a pc or anything - it carries a physical battery on board rather than being rechargeable. The remote goes into pairing mode, and the aids are put into receiving mode by switching off & on, but they don’t seem to want to pair. In any case, for the KS9, if you used the 1 Bluetooth pairing for the remote, then you lose all the phone & app functionality.

Yes I have been connecting mine with Bluetooth.

Hi tenkan - there doesn’t seem to be anywhere on Target to link the remote with the aids, and in fact the instructions suggest that Target isn’t part of the pairing process. Supposedly, you just put into pairing mode (blue light flashes as it is supposed to), and then restart the aids. Unfortunately nothing happens as the KS9s don’t seem to want to pair with the remote (even after making sure the aids have forgotten their original pairing with the phone).

Did you do this to pair the remote?

Press and hold the volume 1 up “+” button
2. Switch on your Phonak RemoteControl while still pressing the volume
up “+” button
3. Release the volume up ”+” button
when the light indicator starts to blink blue
2
4. The Phonak RemoteControl and your hearing aids will now pair automatically
5. After a successful pairing the light indicator is solid green for 5 seconds and you may hear a notification beep in your hearing aid
6. You can now use your Phonak RemoteControl

I sure hope something works with that remote, because frankly it is getting more and more annoying to have to pull up the app on my cell phone to find out what program I am in. When I am in conversations with others, it makes me look as if I am not giving my full attention to the conversation and instead fiddling with my phone like a teenager playing games instead of listening.