Skip to content
HearingTracker
Log in

Phonak Sphere l90 versus l70

This topic is closed.

72 replies6.9k viewsLast reply

Jump
Link to this topic

which actually brings a question I havent searched for yet, is there a way to shut off the ’s past a certain DB threshold? My Audiologist didnt seem to think so. He suggested turning them off

@jeffpa said:

is there a way to shut off the HA’s past a certain DB threshold?

Don’t know about Phonak yet. The ReSound Smart 3D app has buttons to shut off your left and right (or a combined button for both if you’ve fused HA controls).

Phonak warns that HAs are not ear protection. I figure that my occlusive silicone molds with no vent are worth ~10 of sound occlusion, but for nasty sounds, I wear both foam ear plugs in my ear canals and put on passive sound-blocking ear muffs. The plugs block ~10 dB, and the muffs ~30 dB. I don’t like to wear my HAs wearing ear muffs because in hot San Antonio summer temps, my HAs get very sweaty underneath. A privacy fence encircles my backyard, so I’m not too likely to encounter anyone or anything in it when I’m out working with a noisy mower or the like (weedwhacker, chain saw, nail gun, leaf shredder, table saw, etc.) and have to engage in speech. If I were working in my front yard and encountered anyone, I’d just point to my ear muffs!

Look into custom made earplugs, mine are a true 30db, Westone as I recall…I only wear additional muffs if I’m shooting. I tend to run a lot of heavy equipment about the farm herre. Loaders, Backhoes, excavators, etc

PS, was also wondering if heavy equipment higher db stuff would damage the ’s…

Edited

Ear muffs do have one additional use. They serve as UV protection for my ear lobes, one of the more UV-sensitive parts of the human body (along with the nose), as the skin is very thin there, and the inner skin germ cells are less protected by thicker outer layers of dead or dying skin cells.

So, I don’t have to smear my ear lobes with sunblock and then worry about any residue’s effect on components. I always wear a broad-brimmed hat and try to avoid the peak UV midday hours. In Texas, UV at any time of day is ~2x stronger than in more northern latitudes like MO and PA. It’s said that in the U.S. for every 800 miles you go closer to the equator, UV intensity doubles (it’s ~1500 miles from the most northern part of Maine to the most southern part of Florida; don’t know if the doubling thing works if you include the most northern part of Alaska! :grinning:).

In reply to @jeffpa

@jeffpa said:

which actually brings a question I havent searched for yet, is there a way to shut off the HA’s past a certain DB threshold?

In Target, you can manually set an option to turn off mics after 2 seconds of pressing the lower button on the rocker switch.

You can also turn off mics in the myPhonak app on the main screen.

Regarding the strength of the Spheric program:

Screenshot_20241021_022002_OneDrive

In reply to @Bimodal_user

My bottom button, takes 5 seconds to turn off, meanwhile switches program or volume before shuts off. Turning back on even longer. I may play with that today if I get some free time

ty

If there is anything that annoys me, is having to carry my phone about to see what it switched to with a longer press.

@jeffpa said:

My bottom button, takes 5 seconds to turn off, meanwhile switches program or volume before shuts off. Turning back on even longer. I may play with that today if I get some free time

After 5s shuts off completely. In my post I meant turning off mics only while HA is still streaming or using Roger mic. To turn on HA , 2s is usually enough.

Turning off only mics feature is after enabling that in Target:

Screenshot_20241022_230046_OneDrive

why is my turn on ’s so incredibly long then? Its longer than 5s shut off.

I’ll look into that mic shut down, which I believe is the same as when I select it in the app.

I thought I’d adjusted Soft Nois reduction, but actually Noise Block, so maxxed it for phone and streaming also.

Theres a TV program that shows in myPhonak, but I cant find it in Target so far under any of the programs

Edited

I don’t have my Spheres or my TV connector yet, but here’s where you find the pairing/connection in Target 10.0. (click to enlarge any screen capture).

image

And, from what little I know so far about Phonak , AutoSense 6.0 will automatically use the AutoSense OS (streaming) settings for either speech or music. If I see different things when I actually have my TV Connector paired with my Spheres, I’ll update this post (should be a few days).

image

Also, there is the following Target settings available through the Automatic Fine Tuning tab at the bottom of the Target screen, again from the AutoSense OS (streaming). (again, click to enlarge)

image

Perhaps I’m barking up the wrong tree here, and maybe the settings I’ve found are for streaming directly from a Bluetooth-capable TV. IIRC, Phonak’s TV connector uses a proprietary low-energy 2.4 GHz protocol called AirStream. So I wonder, when I actually have my TV Connector paired with my Spheres and they’re connected to Target, whether a new menu item will show up specifically for the TV Connector under AutoSense OS (streaming) or under Streaming Programs.

Jim, Check the Streaming Programs jest below your media speech selection. I don’t have a TV connector but that is where the Roger and Phone connections appear.

Those are what I changed.

Still trying to figure out what this
Tv program is that shows in myphonak

How it’s programmed and how to remove it if I want to.

I have Restaurant, tv and music programs I can select.

Related discussions