what accessories did you get? does costco sell the accessories as well? I asked the audi at the costco how to increase/decrease the volume and she said you can’t do it, I’d have to bring it back to get it adjusted. Isn’t there a remote called the pilotone? Odd that she did not mention this to me.
what accessories did you get? does costco sell the accessories as well? I asked the audi at the costco how to increase/decrease the volume and she said you can’t do it, I’d have to bring it back to get it adjusted. Isn’t there a remote called the pilotone? Odd that she did not mention this to me.
Hi All
New to forum and to hearing aids.
Tested at Costco May 4/14, picked up the Phonak Brio R 312T May 25/14
So far they seem fine, 1st. time user so nothing to compare to.
Will likely have a few questions as time goes on.
250 500 1000 2000 4000 8000
R 20 30 30 65 95 75
L 15 15 10 75 95 70
To those who are having fitting problems. One known issue is that the feedback manager may need to be run before and after programming phonak aids. This seems to have a huge impact on speech in noise performance. It seem like the feedback manager does more than just deal with feedback as the people who programmed it assumed that it would be run after each program adjustment.
I believe another issue with people new to programming aids is that they do not specify the right receiver model and ear mold design in the programming software.
I did the in store demo today on a set of R-312Ts. It was no joy for me, however.
When the HIS pulled up the initial Phonak chart on his computer, (I guess integrated with my audio file from my K5 programming), he indicated the Phonak’s feedback control would not be sufficient in my case. (Or words to that effect - I was not able to hear clearly at the time).
We proceeded with the programming anyway. When finally setup with the 312Ts, it was more like wearing earplugs instead of aids. I’m very much not understanding what was going on.
If you need a super power receiver, you probably want to opt for a more powerful aid instead. I bet the fitter suggested a more powerful aid. I would opt for the b-m13 aid. be prepared in that it will sound different from your ric aids as the mic is not as close to your ear drums.
and make sure the fitter specified the right receiver model and tip style and for the love of god have the person run the feedback manager. I bet most of phonak programming problems could have been resolved with a simple click of the feedback manager icon. And if what I’ve wrote fixes the problem, then please come back here and respond and let us know. So many people come here for advice but then never come back to follow up.
In ré volume control: My Costco programmed my Phonak Brio 312Ts so that the left controls program switching and the right HA gives me a 6 db volume increase in 2 db steps.
I have had my Phonak Biro 312T’s since May 25th, will go for my 1st review June 19th.
Easy to get use to wearing ’s, put them in and forget them.
They are a bit louder than without but otherwise no big difference, guess I expected a bit more.
Not sure if the domes fit correctly or are right for me. Find I am repositioning the receivers often and this does affect the loudness.
At present they are set so I can raise and lower the volume which does not really help in understanding especially when there is background noise.
I will ask about a few things like reprograming, the domes, setting the HA buttons( one for volume up and one for manual program change) and as mentioned “to run the feedback manager”.
Couple things I forgot in my previous post on my Phonak Brio 312T’s.
Likely I will have keep from touching them or spraying them with bug spray. Guess the easiest is to just take them out ?
Also any ideas to help keep from loosing one or both. I spend a lot of time in the outdoors, walking in the bush etc. Right now I wear glasses so I may put the arms of the glasses over top the wire to the receiver.
Also thinking the custom molded ear pieces to replace the domes would be more secure.
Any thoughts ?
Had my 1st. review June 19th. Determined the domes do not fit causing different levels of loudness. My ear canals are somewhat like a partly flattened tube. Opted for the custom made slim tips, molds taken and appointment for July 10th/ 14.
Also had the right button set for increasing volume ( 2 db x 5 up) . The left HA button set to mute or turn off the HA 1st push and turn back on second push, this also resets the volume if required to the normal setting.
thanks for the update. did you ask about the feedback manager?
it’s a button they need to click on with the mouse. in the old ipfg it was a circle with 2 arrows. you see this button on nearly all programing screens. if they don’t know ask them to hover their mouse over all the buttons as this should provide a description of the button. This should take you only seconds.
Yes I mentioned that I had read running the feed back manager was required and she said yes she knew that.
The Audi also mentioned that phonak was coming (forget the date ) and they were looking forward to the update, etc. as these ’s were new to all and they only had a few sets out. Mentioned there was a lot of interest and most customers were choosing Phonak.
thanks for the update. did you ask about the feedback manager?
it’s a button they need to click on with the mouse. in the old ipfg it was a circle with 2 arrows. you see this button on nearly all programing screens. if they don’t know ask them to hover their mouse over all the buttons as this should provide a description of the button. This should take you only seconds.
This thread is very helpful to this dazed/confused newbie (me). My private audio recommended Oticon Nera for $5,000/pair and now I’m thinking that’s bc Oticon isn’t selling to Costco. I was thinking KS 5.0 but then researched Resound Linx and now I’m thinking Phonak Brio to get the iPhone compatibility. Is there any reason that the KS 5.0 would be preferable to the Phonak Brio or vice versa, besides cost? And thanks again for all the help on this forum!
The Brio is somewhat smaller that the KS5.0 and has the frequency transfer feature, which the KS5.0 does not. By the way, I was quoted $3800 for a Pair of the Oticon Nera’s from my audiologist, which are a middle of the road hearing aid. The Alta pro’s are the top of the line aids and in the $5-5.5K price range for a pair.
Wow! That’s quite a difference in cost quotations and very useful to know! I’m inclined to pay somewhat more and buy the Brio over the KS 5.0. At least I think I am!
This thread is very helpful to this dazed/confused newbie (me). My private audio recommended Oticon Nera for $5,000/pair and now I’m thinking that’s bc Oticon isn’t selling to Costco. I was thinking KS 5.0 but then researched Resound Linx and now I’m thinking Phonak Brio BTE to get the iPhone compatibility. Is there any reason that the KS 5.0 would be preferable to the Phonak Brio or vice versa, besides cost? And thanks again for all the help on this forum!
Nera comes in two versions, the base version and the Pro version. If you negotiate, you should be able to get Nera for $1700/ea., and Nera Pro for $2200/ea. One advantage of the KS5 over Brio is the wireless accessories. The KS5 doesn’t require you to wear a neckloop device for Bluetooth or TV connectivity.
Yes I mentioned that I had read running the feed back manager was required and she said yes she knew that.
The Audi also mentioned that phonak was coming (forget the date ) and they were looking forward to the update, etc. as these HA’s were new to all and they only had a few sets out. Mentioned there was a lot of interest and most customers were choosing Phonak.
thanks for the reply, you may be the first person possibly in the history of hearing aid forums to followup on a post.
Phonaks are considered the top of the line aids. their stereozoom feature has set their aids apart from the pact in that I believe they are the only ones that can fully stream sounds between aids. this feature combines all 4 microphones on the 2 aids (2 mics per aid) to help people to hear in noise. Many other companies have binaural features but they tend to send limited amount of data between aids. the frequency shifting feature mentioned earlier is called “sound recover” which is a feature that other aids have in different forms.
This thread is very helpful to this dazed/confused newbie (me). My private audio recommended Oticon Nera for $5,000/pair and now I’m thinking that’s bc Oticon isn’t selling to Costco. I was thinking KS 5.0 but then researched Resound Linx and now I’m thinking Phonak Brio BTE to get the iPhone compatibility. Is there any reason that the KS 5.0 would be preferable to the Phonak Brio or vice versa, besides cost? And thanks again for all the help on this forum!
kirkland aids are just rebranded aids from either resound or rexton. ks 5.0 is based off the resound Verso 9 aid.
People on the board considers oticon aids to rival phonaks. I typically encourage people on the board to compare phonak vs oticon aids. if not oticons then widex or a resound aid. This is because oticon takes a significantly different approach to processing sounds vs phonak so you can make a valid comparison. oticon aids tend to support a wider frequency range but have fewer channels supported. People write that oticons and widex aids have a more “natural” sound.
The only reason why I am using an oticon aid is because the phonak audio smart I’ve tried could not be programmed to perform as well in noise as the oticon. possibly my audi didn’t run the feedback manager.
anyway back to your question. the phonak brio imo is a superior aid compare to the ks 5.0. but since both are sold at costco you should try them both out as everybody have different ears that react differently to different aids and features. It appears you’ve already got a response from rasmus_braun which probably is more informed than anything I can write regarding the latest oticons. this whole “works with iphone” feature imo is overrated. the only thing that’s worth looking into is the fact that you can use your iphone as a remote mic and get rid of the need for a streamer and remote for your aid. settling for an average aid so you can pair it with your iphone is imo not a good way to go.
BTW please post your in your signature. honestly nobody can make a valid recommendation without seeing it.
Also if you decide to go with the brio then you may be penalized for not buying an aid from the person fitting the oticon aid for you. if that’s the case I would trial the oticon anyway since you are going to have to pay the penalty. Ask your audi if he or she will refund the penalty if you decide to come back after trialing the phonaks. if the audi says yes then you should go try out the brio. please report back to us.
Thanks for the complement doubledown.
Couple of things I didn’t mention:
After setting the buttons for volume and program the ’s now play a short musical note at 12 sec. when you turn them on by closing the battery holder. They didn’t do this at 1st. Kind of nice as I use to have to rub them to check they were both on.
When opting for the slim tips at $45 each,which are clear plastic of some type, the audi said she would them made with the largest vent hole possible. She felt this would be best for me. Also I had a choice of 2 versions, short and small or a bit longer with tail that appeared rigid that would hold them in. The audi recommended I try the smaller short ones 1st. as they would be more hidden and likely just as secure. Then if I wanted the others she would have them made at no charge in the 1st 90 days.
After setting the buttons for volume and program the HA’s now play a short musical note at 12 sec. when you turn them on by closing the battery holder. They didn’t do this at 1st. Kind of nice as I use to have to rub them to check they were both on.
That’s the startup delay. You can have it set to 6 or 12 seconds, or none. There’s a startup melody that occurs right after the hearing aids are powered on, followed by a musical tone for the Automatic program. The startup melody can be turned off.
Thanks for the complement doubledown.
Couple of things I didn’t mention:
After setting the buttons for volume and program the HA’s now play a short musical note at 12 sec. when you turn them on by closing the battery holder. They didn’t do this at 1st. Kind of nice as I use to have to rub them to check they were both on.
When opting for the slim tips at $45 each,which are clear plastic of some type, the audi said she would them made with the largest vent hole possible. She felt this would be best for me. Also I had a choice of 2 versions, short and small or a bit longer with tail that appeared rigid that would hold them in. The audi recommended I try the smaller short ones 1st. as they would be more hidden and likely just as secure. Then if I wanted the others she would have them made at no charge in the 1st 90 days.
what receiver are you using? are you maxing out the volume on the aids?
looking at your there’s something you might want to try. you actually have useable hearing in the highest frequency. something that may help you hear people speak in noise. noise tend to be lots of low frequency sounds as they travel farther than high frequency sounds. If hearing in noise is what you are most interested in, I would get the audi, if he or she didn’t try already, turn off sound recover or set it so that it compresses sound only past the highest possible frequency. it compresses all sounds past a certain frequency threshold at the expense of speech comprehension. once set have a conversation in the noisiest part of costco and see if you hear in noise better. It’s a crap shoot and if you don’t like it you can have them reset it back. But I think moving the threshold can go a long way in improving your speech in noise performance.
Don’t know what receivers I have. AS for volume I normally leave the ’s on normal and have only tried the 5 x 2db for testing. At times even when voices are about as loud as I would want them I still have some trouble with comprehension.
EDIT
The receivers are marked 1xS . Not sure what that means but I’m sure some of you will know.
Sorry for the delay, I have to pay better attention.
Don’t know what receivers I have. AS for volume I normally leave the HA’s on normal and have only tried the 5 x 2db for testing. At times even when voices are about as loud as I would want them I still have some trouble with comprehension.
EDIT
The receivers are marked 1xS . Not sure what that means but I’m sure some of you will know.
Sorry for the delay, I have to pay better attention.
I think you have the standard receiver which will give you an insanely good frequency range of 100-8500 Hz. Think SoundRecover uses an algorithm to determine what to set the threshold. This may cause sounds to be compressed down to frequencies you can’t hear well in. There appears to be a check box to disable SoundRecover. I would ask your audi to uncheck the box to disable this feature.
You can also go to the other extreme of lowering the threshold in an attempt to get all speech sounds below that problematic 4000 Hz area for you. But this could possibly cause your high frequency hearing to atrophy and the compressed sounds may hurt your speech comprehension. unfortunately I believe soundrecover is set for all programs universally and not just for a particular program.
