Skip to content
HearingTracker
Log in

Looking for sifit database for connexx6.4.5/7.2.2

This topic is closed.

29 replies13.9k viewsLast reply

Jump
Link to this topic

Hi, got the link, installed, could see the aid in database as well. However I could not detect the aid. I used flex, cS44 cable and HiPro 2.

Edited

Oh, the cable guide shows that need the battery in. I’m unsure if the Nitro needs the battery in?

What about the Black Alignment Dot on the FlexStrip? Is the Black Dot facing downward toward the battery door like in this picture?

c1

ETA: Here’s a link to a similar Topic;

ConnexxAir don not detect Silk nx
Check which Connexx programming device is selected? Check the small black alignment dot on the flex strip. [Capture] Check Device Manager to see that mini Pro has registered as Hi Pro. [c2]

it’ll need the battery to power up, and good point on the correct way to align the flexstrip, been caught with that before myself.

In reply to @pvc

Sorry for delayed reply over here… The three strip contacts on the aid seems to be broken, Hence the device was not detected. The problem resolved. Thanks a lot for the help.

Related discussions