Suggestions for profiles to setup on Oticon OPN 1

@Volusiano said:

The Oticon programming software is called Genie. Before the OPN, it was Genie 1, but for the OPN, it’s now Genie 2. It’s compatible with Windows 10. That’s what I’m using, on my Windows 10 laptop.

To be precise; Genie software supports older models while the newer Oticon Genie 2 supports newer models (beginning with Opn). Downloading Genie 2 gets you both versions but if you want to run the old version instead of running the default new Genie 2 version then you need to choose a separate .exe file in order to run the old version.

You’re right, the first picture shows the cable with programming pills (for eg Siemens pure 701), but if you click at the last small picture below the big picture, you will see the correct FlexStrip (the page makes a little confusion).

Because they are for phonak that means they are CS44A correct? Even though there is no A on the cable.

@Volusiano said:

Yes, you can do it in 2 ways, statically have it set in Genie 2 so that it defaults to that setting every time. Below is the Genie 2 window under “End Fitting”/“Accessories”/“Phone” where if you set the middle row (Mic relative to phone) to the leftmost value, it’ll give you -12dB attenuation relative to the streamed phone sound. The right most value is 0 dB for the mic, meaning there’s no attenuation and you’ll hear everything from the mic like normal. You can also adjust the streamed phone sound on the top row. The middle value is 0dB (normal volume), so you can go up or down to 3dB, 9dB respectively. The third row is to adjust the sound quality to fuller or brighter, and you can even adjust the power bass.

You can see the next tab to Phone being TV Adapter with similar adjustments for the TV Streamer.

As if that wasn’t enough. See that little double-Circle icon in the middle of the left-pane and right-pane. You can select that or deselect it to set values for both ears; Or to set individual values for the left ear and the right ear.
/uploads/original/282991028d343458d9e58b038646b7e2190d58ed.png

Can you use programming pills instead of the flexconnect cables?

No, OPN does not use the pills. It uses flex strips.