Skip to content
HearingTracker
Log in

Cleaning wax from hearing aids

This topic is closed.

47 replies7k viewsLast reply

Jump
Link to this topic

I think most Audi’s will tell clients to use on your $2000 to $3000 hearing aid. I seriously doubt an Audi will tell someone to go out and buy a Jodi-Vac, though I agree with you there might be some savings (long term) vacuuming out aids versus buying wax guards. A wax guard can last two month. Using six wax guards a year is peanuts compared to the cost of a Jodi-Vac. Save your $150 or what ever so you can buy your cheap Roger Pen for $800. The way things are going it won’t be long before we have are first two new HA’s for $10,000 (or $5000) each. Now won’t that round number make you want to buy a Roger Pen, and TV adapter and Jod-Vac so you can push the total count over $11,500. At some point the “Bubble POPS”.

The Jodi-Vac is also good for vacuuming the microphone openings and the space/slots around my button/switch. Considering all the other consumerism and consumption in the American life style, people showing off expensive cars, expensive houses, remodeling those houses like crazy (in our neighborhood, at least), blowing wads of money on dining out, vacations, etc., paying $99 on Amazon for a Jodi-Vac is hardly the end of the world.

Jim - you need to look at the “big” picture. ’s are not cheap. I bet your first car didn’t come any where near the cost of a HA today. Even second car, depending on when you started driving. And I’m talking HA retail price. One of the reasons people don’t wear HA flat out is the cost. Thus the reason we are going to “over the counter land” next year. If you use a HA you get zero wax inside a HA. Its a “no brainer”.

I guess it all depends on how well off one is. Many Americans can’t even afford the ’s. I “accidentally” married a woman who became an M.D. So $100 for a Jodi-Vac is not much in the “Big Picture” of our finances. This forum is a pretty select group of people - they’ve pretty much all managed to scrounge together the money to buy HA’s and maybe just like going out to a nice restaurant for dinner, some of them don’t mind spending $$ for accessories, too, to get the most out of HA’s from their point of view. It just seems two-faced for anyone to espouse paying a lot of money, say for Marvels, Opn1’s, or whatever, instead of less premium HA’s but economize on accessories to go with them. If we want to help people save money, we should tell everyone just hold off, if you have mild to moderate loss, until August, 2020, and you’ll save a bundle on HA’s. That’s the real “big picture” in HA expense. It’s pointless debating this: those that can afford it and want it will get a Jodi-Vac. Those that can’t afford it or don’t want it, won’t. That’s the way it should be and no point telling people like me who are REALLY well off that I shouldn’t spend $100 on a Jodi-Vac. My wife and I taking our daughter and her family (two kids, husband) to one dinner at an average restaurant in Austin, TX, can easily blow that amount of money on ONE meal. When the other daughter showed up, it was $109 (including generous tip) for Chinese takeout. $100 is worth very little in terms of purchasing power in today’s world. A loaf of bread is $3 or $4 when in the 1960’s it was something like $.35 to $.50.

In reply to @youbgone

@youbgone said:

If you use a HA wax guard you get zero wax inside a HA. Its a “no brainer”.

Maybe zero wax in the receiver, but plenty of gunk in the microphones, the switch, and even in the battery compartment. As I said earlier, I have the advantage of having access to a microscope at work, and I’m pretty impressed with the job that the Jodi-Vac does. I’m terribly sorry that my spending habits fret you so. I won’t tell you what I just spent on a Roomba…

Once a week I put my domes in a container and tip boiling water on them. I’m surprised it doesn’t wreck them, but it works great. Been doing it for months.

My method would not be recommended for any but the semisoft silicone type of mold. I drop mine into a diluted solution of household ammonia and water. I have done this for over 10 years and noticed no damage to the molds, but the wax dissolves from the molds very quickly without a trace of wax left behind. I then use a compressed air blower to clean them out completely.

Edited

Not criticizing, but some of you really get serious about cleaning . Somebody said “why use a vacuum when you can use a broom” in relation to complaints about expense of cleaning tools.

Speaking of broom. I’ve been cleaning my vent tubes on my molds with a single “tong” or whatever from a kitchen broom forever now. And I clean the outside of my molds with a toothbush dipped in peroxide. And to make it even better, I never use . They affect the sound for the negative in my experience.

Note the above is related to my Oticon Agil HAs that I’ve had for 10 years worn 16-18 hours a day. I’ve replaced several speakers (due mostly to sweat) in my HAs but only one receiver in all that time. Nothing else. Maybe I just got lucky…

Nonetheless going to start a trial on Phonak M90Rs next week. If I buy I likely will follow the same regimen

Edited

I use the brush that came with my Phonak 70R along with alcohol free wipes on the domes and case…

Since I also have sleep apnea, alcohol free wipes are already in the house for cleaning my CPAP supplies.

Seems to be fine for me

OTH, I think it’s in Dillon’s book on Hearing Aids that he says cupping one’s hand around an ear adds 10 of gain to hearing - not bad! It’s not just a useless habit and it’s semi-directional, too. What more could you ask for?!

In looking around for ways to clean silicone molds when removed from receivers, I came across this healthyhearing.com4 article that seems pretty even and balanced in its recommendations for cleaning. In searching for where to post a link on the forum, I see HT members have cited the Healthy Hearing site a number of times of the past decade or so. The article also provides good advice on when it’s better not to leave your HA’s outdoors in a coat pocket or in the sun by the side of a swimming pool, etc.

Cleaning your hearing aids12

Regular hearing aid cleaning will provide years of reliable better hearing. Find out how to clean your hearing aids and protect your investment.

Seems like the most usually recommended method on the Internet overall for cleaning silicone molds apart from the receivers is to soak them in a dilute solution of dish detergent for a while, thoroughly rinse them and thoroughly dry the molds before reattaching the receivers. I’m interested in this because wax and debris can get in the receiver bore of the molds and the vent tubes and is difficult to remove from these nooks and crannies when the molds are still attached to the receivers and have the vent inserts in the Select-A-Vent bore holes on my molds.

This is just another commercial plug for jodi vac.

If you are like me you will have the jodi vac set up in a place where you not only clean your but do other things as well. I have found the JV to be very useful for some of those other things too.

This topic is 3-4 years old now, but how about some new devices or actual insights and replies. ’s are getting more and more like earbuds with etc. domes are getting custom molds or HA’s.

I use to clean my Phonak wax filter in a eye contactlenscleaner, a 40kHz ultrasonic cleaner.
My earwax gets in my waxfilters and they occlude every 10-14 days. And the filters are pricy, so I try to re use them as oft as possible. I inspect them by making a picture with my macrolens on the camera and see if they need cleaning.

Now this website crossed my path: https://www.warnertechcare.com/products/cerumen-removal/hearing-aid-vacuums?product_list_limit=all8

Any one or any thought about next to Jodi the SpinStation as mentioned here: https://www.warnertechcare.com/products/cerumen-removal/hearing-aid-vacuums/ghi-spin-station-earwax-removal-system6

Hope the old responders can share there recent findings also once more maybe with some additional information….

Thanks for your appreciated help in advance.

In reply to @BlueCrab

@BlueCrab said:

Why use a vacuum cleaner when you could use a $10 broom? Why buy a car when you can get a bicycle for a couple hundred? Heck, what’s wrong with walking? It’s free! Why buy an electric mixer when you can use a whisk?

@BlueCrab: Exactly! That’s why you don’t see any obese Luddites walking around the mall!

Yep: Jodi Vac. Love it. Used to go to my provider every two weeks or so for cleaning. No more! They love jodi vac too.

Yes, once again, Jodi vac is great. But, if you don’t have one and are going to buy one, get the Pro model. Costs twice as much but is more than twice as great.

Related discussions