Skip to content
HearingTracker
Log in

Resound Smart Fit Software Download

892 replies36.7k viewsLast reply

Jump
Link to this topic
Reply

You won’t get SmartFit 1.8 as that was replaced by newer versions many times over the last few years. The current version is 1.16

No doubt someone could send you the link to SmartFit 1.16 if you asked nicely.

Welcome to the forum sure it’s available but you’ll also need the Noahlink wireless programming device as well for your projects.
Do read the user guides as it’s very helpful for setting up the first time.

Good day
When I looked at the previous posts, several people are looking for the software “resound smart fit” to download. I bought resound key 4 and when they set it up for me, it was not set well, I would like to set it up myself at home, can someone send me a link where I can download the software? thank you very much.

Welcome to the forum, sure it’s available but you’ll also need the Noahlink wireless programming device to make additional adjustments to your , best read the user guides as well very helpful for setting up the first time.

Hi there, you’ll also need the Noahlink wireless programming device for your projects, do read the user guides as well as it’s very helpful for setting up the first time.

Good day
First question: can the Noahlink device communicate with the SIGNIA Motion CHaGo SP 7x receiver from WIDEX?
Second question: is it possible to download the software for setting the Widex charging device? What is the name of the software that can communicate with the SIGNIA Motion CHaGo SP 7x receiver from WIDEX?
Thank you for your early reply.

Hi there, this is confusing, Widex and Signia are different , but what’s this issue about, your receiver? Or the charger?

Noahlink wireless programming device can be used on Widex moment models onwards, you won’t need Noahlink wireless for connecting your charger, you could just use a USB cable I guess, but I have no idea if Widex compass is any good for a “charger” ? Hasn’t the charger got a reset button somewhere?

Good day
It is a Signia hanging hearing aid.
I didn’t know that Widex and Signia are different hanging hearing aids. I thought that these products were manufactured by one company. I apologize. I will give a precise question: Hanging hearing aid type: Signia Motion SP 7x can communicate with Noahlink wireless ??
Second question: For the Signia Motion hanging hearing aid, which setting programming software is used? Can the programming software be downloaded??
Thank you for your early reply.

WSA audiology is the company that was formed between the two, but they are independent of each other with different products, software etc.

So yes you can use the Noahlink wireless programming device for your X models, they are called (receiver in canal)
I would suggest that you do a little research before jumping in on a project, it’s easy enough tho, and plenty of use doing DIY.

Hi everybody.
I bought a set of Resound Omnia devices online, pre-prepared to my I sent them.
After a few online chats and modifications I am not satisfied with the settings.
It is taking a lot of time and effort so I decided to try and make thing more easy for me.
I bought a Noahlink wireless and I thought the rest would be easy…
Now I found out I need some software too.
Anyone who can provide me with a link to the needed files?

Thanks!
Johan

Welcome to the forum, sure it’s available, great you have your Noahlink ready, do read the user guides as it’s very helpful for setting up the first, it’s all pretty easy to do.

Related discussions