Skip to content
HearingTracker
Log in

Ordered the Roger Select today

This topic is closed.

197 replies12.5k viewsLast reply

Jump
Link to this topic

In reply to @Bimodal_user

Interesting that you’ve sometimes had good results in noise. A way to test if your low frequency hearing is an issue is in the noisy situation to turn off your hearing aids. If the noise is manageable, tweaking may help. If the noise is overwhelming without the aids on, unless you get a more occlusive fit, I don’t think all the tweaking in the world is going to help. Reducing the level of sound that the hearing aid mics contribute is a good idea though.

Loud music/restaurant nite. Good seat, middle of the table back to the wall. Lots of adjustments including splitting right-left volume, playing w the slider and buttons. Was able-to hear 3 across from me and 1 next to me pretty well.

Big surprise when I walked across the room to the bar. With the select on the table about 10 or more meters away i was able to hear the table conversation more clearly than when I was sitting at the table.

Edited

I believe that there are only 3 versions of the pen, Easypen, 1.1, and the iN. All clearly marked. If you get the Target software and the Phonak Updater, all free, you can get a full readout and update the software.

Nice info. So one Roger Select in a room or church congregation can be paired (as shared) to several ?

Out of curiosity, can Roger Select be paired with any HA brands?

It’s complicated, read all about it on the subforum. You don’t need target to run the upgrader. If you have target you can add the upgrader to it. You don’t need the noah link to run target and learn stuff. You do need a noah link if you want to make changes and adjustments to your fitting. But that comes much later after you learn and know what you are doing.

In reply to @Passion_Fruit

Hi @Passion_Fruit. It’s weird, in the last few days I’ve learned WAYYY more about Roger than I ever wanted to.

Yes, Roger Select supports an unlimited number of receivers, although you are limited by proximity.

Roger will work with most devices, as long as you can find a shoe that fits on the bottom of your hearing aid or if your devices support t-coil. is probably the easiest and least expensive - you grab a Roger MyLink and pair your Roger transmitter (Pen, Select, Mic2) to that. The shoe method requires two shoes and two Roger X receivers (assuming a fitting). Ebay is littered with Roger Pen transmitters, MyLinks, and X receivers; but I haven’t looked for hearing aid specific shoes.

I really like my Roger stuff and find it super-useful.

In reply to @Raudrive

@Raudrive said:

Zebras commented about this issue, too much ambient noise using the Roger. She mentioned if the streaming programming had too aggressive noise block features settings it would cause this issue. I do plan to try this because I too have this issue.

Have you change noise block? Any improvements with Roger Select?

Im sorry to hear this Rau. I will try it. Can u remind me if i forget in one week. I have roger pen only though. No select. Using a marvel tcoil ric

The machine installs the license from the Roger X into the Marvel/Paradise.

No integrated receivers won’t work.

In reply to @Zebras

I have Virto Marvel M70 hearing aid pair. How we install Roger receiver (03) in the Right and (02) in the left hearing aid.
After installing Roger receiver (03) in Right Hearing Aid, tried installing Roger receiver (02) in the left hearing aid, but the the license gets installed in the right only. After installation completes, both 03 and 03 licenses are in right hearing aid.

Can any one help, please.

Active discussions

What the forum has been talking about this week.