Skip to content
HearingTracker
Log in

Phonak App & Smart Watches

This topic is closed.

25 replies5.1k viewsLast reply

Jump
Link to this topic

Hi Folks,
I’ve been controlling my hearing aid’s using the “Phonak App” on my phone, but as my phone is quite big it can literally be a pain in the backside carrying it around all day. So what I decided to do is purchase a full android smart watch but for some reason I can only get the right aid to show up in the Bluetooth pairing and nothing at all shows up in the app it’s self. I just wondered if anyone has had the same problem and if so, did you get it sorted out and up and running OK.

Cheers.
Kev.

10 people in this conversation5 min readJump to latest

Delete the pairings from the watch. Turn off the Bluetooth on your phone. Then reboot the aids and try to pair with your watch. Should work as expected after that. Assuming the implementation on the watch is standard.

(1) What watch are you using?
(2) Are the hearing aids still paired correctly to each other (do they still adjust volume together, do they still connect to your phone normally)?

Hi and thanks for your help,
The watch is a KOSPET Prime 4G/LTE Smartwatch, the aids are still paired together and yes they still connect to my phone ok, the only thing I would say is the right aid is programmed to be slightly louder than the left but they are still paired together.

Kev

Have you tried taking the Phonak app off your phone then try the smart watch?
My Phonak aids always show the R aid only in whatever device is connected with Bluetooth. The default setting in the Phonak programming is set to the right aid. This can be changed if needed but only one aid will show connected in your Bluetooth devices.

Is the bluetooth in your smart watch ? I think the app uses BLE when controlling the aids. My older LG phone would connect with the aids a couple of times, but then fail after that. I tried a newer phone with a newer bluetooth implementation, and it seemed to work OK. I found the app to be worthless for me, and deleted it. I understand a lot of people do use and like it though. As they say, YMMV.

In reply to @Raudrive

Thanks for your help, just tried what you recommended and still the same unfortunately.
I did notice on my galaxy A10s phone that the Bluetooth was showing both left and right aid.
I don’t really understand what the phone has to do with it, as the watch is a full android watch and as such I would have thought it would be a “stand-alone” as it has the phonak app on it.

Kev.

In reply to @John_Green

The manufacturer website doesn’t give any Bluetooth specs, that I could find, but the chipset used in the watch does in fact support BTLE. Interestingly, it’s actually a phone in a watch form factor, not a smartwatch per se. It’s running an entry level phone chipset and a full version of Android 7.1.1.

That’s what I have been doing, I haven’t been using the phone, that’s why I purposely purchased this particular watch so I could do away with the phone altogether.

Kev

In reply to @John_Green

The Phonak M90 RT aids I have easily paired with my old Samsung S3 phone and now easily pair with my Samsung S9 phone.
These aids also easily pair with a pretty new iPad.
These aids are very flexible about connecting to Bluetooth devices.
Usually the problem is too many devices trying to connect.

Yes, about four times I think, I know sometimes I had problems with the app on my phone and found deleting the app and then reinstalling seemed to clear the problem but doing this on the watch makes no difference.

Kev

Hello,

I also had the idea to buy full android watches, such as the Kospet Prime, Lemfo LEM12, etc. And I have already attempted to find out more on this forum.
The Bluetooth these watches mostly use (currently with the recent watches) seems to be a MT6739 bluetooth chipset (https://www.mediatek.com/products/smartphones/mt67393).
The specs according to the MTK website: Bluetooth Version: 4.2 (Low Energy).

I wonder whether 4.2 woul be ok, since Phonak temselves claim 4.2 is ok. But maybe it is also dependent on the Operating System on the watch?

I hope it will work

Hi gsl,
Thanks for the info, I am not going to give up and I’m going to keep trying, there might be a firmware update out one day that will fix the problem. If I fix the problem before then, I’ll post it on the forum.
Thanks to everyone who chipped in with advice.
Here’s hoping.

Kev :slight_smile:

Related discussions