Skip to content
HearingTracker
Log in

Pairing Phonak Roger Pen iN with Sky Marvel M-PR

This topic is closed.

17 replies2.3k viewsLast reply

Link to this topic
Edited

Hi,
I am having some difficulties trying to pair my daughter’s Phonak Sky Marvel (m-pr) with a Roger Pen In.
The confusion is because one audiologist failed to successfully pair the roger pen in to the Marvel, without any proper explanation. Basically, the pairing procedure should be fairly simple but for some reason, it cannot be completed.
Another audiologist told me that we would need to “unlock” licenses before we can use the roger pen in with the Sky Marvel.

I am bit puzzled here, it is strange that two different audiologist are saying different things (the other confirmed that no licenses are needed!) and I was expecting this to be a much simpler task.

Would anyone with experience with a roger pen In and sky marvel be willing to share their experience and confirm if “licenses” are indeed needed?

thanks a lot in advance
regards

3 people in this conversation9 min readJump to latest

From what I have gathered so far, marvels have hw aka roger receiver, pen iN comes with licenses for 2 roger receivers.

However in order for them to work together, must get the information about licences. That’s what the second audi must mean by unlocking the licence.

How exactly it works (just sw, or transfering some pins I’ve seen), I have no clue. Yet.

However at Friday I will have some answers, since I am getting select iN and regular pen then (because Germany doesn’t import iN pen) and my theory is that after we unlock licences using the iN select, regular pen should also work. Because licence is for receiver (built in in marvels) and not for the transmitters. It’s just that iN versions come with licences, while regular versions would need roger recevier to be bought anyway and receiver has licence in it.

My assumption is based on the fact that advertising says that you can connect one HA to multiple roger mics, so it makes no sense that you’d need to buy roger receivers for each mic you buy and then each time swap both mic and receiver.

Anyhow, if I’m right, then shops are taking more money than neeeded, in case they sell you pen and select both iN versions, since they’re more expensive than regular versions. Although, I did saw that for primary mic you choose if it’s gonna be select or pen, so maybe not many people overpay. Or they don’t need both.

Again, from what I’ve gathered so far.

Maybe @RogerPM can help clearing things up?

I have found the following online, which seems to be pretty clear:

So how does Phonak Marvel and Roger Direct work together?

A common misconception around Phonak Marvel and Roger Direct connectivity is that a quick firmware upgrade of Phonak Marvel hearing aids will automatically and at no cost enable you to stream a Phonak Roger transmitter straight into Marvel hearing aids. No physical receiver, no extra cost – but not true!

To use Marvel with Phonak Roger equipment you either need to have at least one standard Roger transmitter (like a Roger Pen or Roger Select) and two Roger X 03 band receivers

OR

a Roger IN transmitter. Examples of a Roger IN transmitter include Roger Pen IN and Roger Select IN.

(A Roger IN transmitter holds the equivalent of 2x Roger X receivers within itself, and costs virtually the same as the cost of a standard Roger transmitter and 2x Roger X 03 band receivers).

To enable Roger Direct streaming you need to ask your audiologist to upgrade the firmware on your Phonak Marvel hearing aids. (If this has not already been done and you were supplied with Marvel hearing aids before November 2019).

  • If your hearing aids were supplied after this date you are very likely to be running firmware new enough for this not to be an issue. Your hearing professional will need to be using Phonak Target fitting software v6.1 or later to upgrade the firmware for Roger Direct.
  • If there is any doubt at all that your Marvel hearing aids are running on a new enough firmware version to enable Roger Direct all you need to do is ask your audiologist to connect your aids to their laptop and Target fitting software, it will automatically prompt them to upgrade the firmware version if one is available before they can do anything else.
  • The next step is to ask your hearing professional or accredited trainer to do one of two things ;

Option 1).

Use a special programmer to transfer the Roger X 03 band receivers into your Marvel hearing aids. This converts Marvel to hearing aids AND combined Roger receivers. (No external additions or neckloops to receive audio from a Roger transmitter).

Option 2).

Use a Roger IN transmitter to transfer (https://www.phonakpro.com/content/dam/phonakpro/gc_hq/en/products_solutions/wireless_accessories/roger/documents/Installation_Guide_BtB_Roger_iN_microphones_210x297_EN_V1.00.pdf53) a Roger X (an IN transmitter holds 2 Roger X 03 band) to each hearing aid.

So, from what I understand, transferring to Roger IN transmitter to is quite easy and this is what we have also been doing at home, however with no success. In the PDF mentioned, I don’t see “licenses” mentioned anywhere.

thanks
regards

Yes transfer from IN device to is easy but usually is done in audiologist office, not something usually at home - unless you have all the right equipment. Also, IN transfer activates 03 Roger so you can then use all 03 devices but not 02 devices. An 02 transfer allows you to use all Roger devices.

In reply to @oglojunkie

I think that aforementioned audi under licences meant this transfer you describe. Me too.

Since there’s no physical object to transfer, saying licence instead of receiver can help understanding for some, while confusing others :rofl:
I mean, Roger X is physical device that can be bought (and is needed for regular roger mics), and it holds licence in addition to hw. Ok they don’t call it licence.

To me that term is easier than calling so many things here receivers.

Thanks for pulling this out!

In reply to @oglojunkie

@oglojunkie said:

and this is what we have also been doing at home, however with no success

I’ve read this again, did you do the test to see how many Xes/licences are in your pen?
Another one, are you sure you have newest firmware in your ?

To me, those two things look like most likely, assuming that you kept them in described distance.

Or you successfully installed Xes already but not paired them? I think both things need to be done. Don’t hold me on my word, I’m still figuring it out.

Totally agree with you with the licenses VS roger, which to me is kind of confusing. I also think that there are no actual licenses at all, but when they mention “licenses”, they simply mean “transferring” the roger X to the .
I have tested the roger pen IN to check the number of receivers. I have done this because I thought that maybe the roger X were transferred to another set of HA, hence I could not transfer them anymore to my HA. However, the procedure resulted in two blinking red dots, which - according to the manual - means that no roger receivers are installed.
Good point about the latest sw and I thought about that as well. Both audi told me that they have the latest fw installed, but I would lke to see it myself, so today I am going to to visit one of them (for another reason) and I’ll ask them to check again,
In another thread it was mentioned how to test if ha have the latest fw and the behaviour I have seen doesn’t seem to match what is expected with a v2 fw.
I’ll keep you posted on that, thanks for your feedback though.

regards

@oglojunkie said:

I have tested the roger pen IN to check the number of receivers. I have done this because I thought that maybe the roger X were transferred to another set of HA, hence I could not transfer them anymore to my HA. However, the procedure resulted in two blinking red dots, which - according to the manual - means that no roger receivers are installed.

So, then you’re right, those receivers are in some , be it yours or someone else’s.

If pen is trial one, that many customers use to test, maybe audi forgot he need to return the ‘licences’ back into the pen so that the next customer can put them in their HA.

I remember seeing some instructions that I’ve interpreted as pairing ones. When I had on trial roger select with previous audi, I had to use some needle/pin to connect the HA with select. If I remember correctly from that pdf, no needle was needed for ‘license’ transfer. That’s why I concluded that you need both licence transfer and pairing.

It makes sense, since you (I think) need licence only once per HA, while you might pair with several devices.

Check if there’s user instructions. I had them in paper, few small pages. I’ll try to dig them out online and see if there’s something similar for pen.

Ok, I think I got it.

The pdf you have found is for transfering the ‘licenses’.

If we assume/hope ‘licences’ are in your , then you need to connect them before using, check here

Product User Guides | Phonak1

Find the hearing aid user guides/manuals for Phonak product support.

Ordinary user guide, pick the one for in (but I think there’s no difference). It uses that button and not the hole (hole is for licences, it seems)

thanks, I have the UG for the marvel IN; unfortunately, connecting (or rather, try to) the pen to the (via the connect button on the pen) was the first thing we tried :slight_smile:
Since that didn’t work, we tried “regressing” the possible steps, but still no success.
By the way, I have checked the sw in the HA and it is indeed the latest available for the Sky Marvel (1.0.9.0)
Back to what you mentioned on “transferring licenses”, here is what I read on the manual:

Checking number of Roger receivers in a Roger iN microphone
After turning on the Roger microphone, briefly press the install button on the Roger iN microphone:

The indicator light feedback will tell you the number of installed Roger receivers:

two green: two Roger receivers installed
one red, one green: One Roger receiver installed
two red: No Roger receiver installed

You seem to interpret this behaviour the opposite of what I thought. I understand that two red lights mean that no roger have been transferred (so no licenses transferred), but you seem to think that this means that licenses were already transferred so nothing is available in the roger pen IN?

thanks!

@oglojunkie said:

. I understand that two red lights mean that no roger have been transferred (so no licenses transferred), but you seem to think that this means that licenses were already transferred so nothing is available in the roger pen IN?

Yeah, that’s how I understood the beginning ‘checking number of receivers (our’ licences’) in a microphone (pen itself) ’ that 2 green means they’re still available to install on and two red means they’re already used.

Which lights you have?

If green, I’d try step for ‘licences’ so with spike, and then step for connecting, so the button.

Please, keep us posted, I’m highly interested how those gadgets really work…

I’d try connecting them now, per user manual, so button thingy. With hope that they’re transferred to your .

If that does not work, then I’d try per your understanding, assuming that licenses are still in the pen, first do licence transfer, check colors then, and then do connect and see.

No, still no luck, and to be honest, after re-reading the manual, I also think you are correct.
Two blinking reds mean that NO roger receivers are included in the Roger Pen IN, so there is nothing to transfer to the . At this point, I am quite sure that the roger were transferred to another set of HA when they were testing the pen, but then they were never “uninstalled”, so someone has two roger receivers in the HA now :slight_smile:
Anyway, I have explained this to my audi and I have asked them to order another Roger Pen IN (new!).
I will update you when we receive it (hopefully soon)!

thanks

In reply to @Blacky

Just wanted to follow up on this. The new Roger Pen IN finally arrived and everything we said was confirmed.
When pressing the install button for one second, I had two green, meaning that two receivers were available.
Installing the two receivers into the Marvel was extremely easy as well.

Hope this helps!

regards

Oh, sorry I forgot on this topic. I have have tested that on select iN. But it’s nice to have confirmation that pen iN behaves the same. Thanks :+1:

Also, uninstall is easy in the same way. P

Single most important thing to remember is to keep second ha off while you work with the first one.

Related discussions