Skip to content
HearingTracker
Log in

Kirkland? KS7.0 or KSHA03 or other? looking for decent used pair of hearing aids I can self program

This topic is closed.

15 replies1.9k viewsLast reply

Link to this topic
Edited

hello-
looking to get some hearing aids for 80 + year old mom who has none and needs some hearing help for conversations/has trouble in crowd/noisy environments.
need to self program and adjust - can’t afford thousands. trying to get something (better than nothing) for lik $150-200 that has a shot at helping her some.

the ks7.0 and ksha03 are a couple i have come across i can afford - also Starkey Halo i110’s.

I don’t need bluetooth, streaming, phone/tv links etc. just some tuneable/adjustable amplification for her to hear convos better.

any recommendations on reliable models that have decent shot of having a few years left in them if i buy them used - and that are self programmable - with proper connectors/software?

looking for simple, less features, some basic amplification that can be tuned/adjusted to work a bit for her. would any of the older kirkland models be a decent bet? any rechargeable models?

thanks for any ideas/guidance!

3 people in this conversation5 min readJump to latest

I would go for something along the lines of Phonak Q50 or V50 Audeo or Bolero, very cheap on eBay and all you need is a iCube ll programming device.
The Kirkland are ok, but be careful with the older models that can’t be programmed, as in locked, after KS7 would be fine.
Phonak Biro from Costco as well are available cheap on eBay.

Just remember it’s not one size fits all, so if you go type you’ll probably need to get the correct size and power receivers to fit your mum.

Post a so everyone can offer more advice.

thanks all. good points to consider.

leaning toward KS7’s - they can be user/self programmed yes?
what would I need for the KS7’s? conexx 8 software and the noahlink? do i need a physical connector or it can do wireless?

when I read KS7 users talking about the “programs” that costco put on for them, etc. and if I buy used I’ll be able to set up just as if I was at a costco (since I won’t be b/c I’m buying used?). Did these cost like $1500 when new?

for a senior - no streaming/bluetooth/special connectivity needed - will we use the smart phone app to do basic volume/EQ adjustments for her after programming for her up front?

thanks!

@jaybradley said:

they can be user/self programmed yes?
what would I need for the KS7’s? conexx 8

Yes they can, also yes you’ll need Connexx software and hardware, HiPro and cables/programming pills (312) or a ConnexxLink programming device for wireless, Noahlink won’t work unfortunately.

@jaybradley said:

for a senior - no streaming/bluetooth/special connectivity needed - will we use the smart phone app to do basic volume/EQ adjustments

I believe these are Mfi so should work with iPhone, you could use touch control app with android if it’s still available.

THanks! could you point me to the most budget friendly setup for the programming - are these ebay available items/used etc.?

Hipro + cables/pills 312?
or
connexxlink

And One of the helpful posters here can send me a link to the connexx software? win 10 - any work with Mac OS?

thanks for your and others’ generous help.

@jaybradley said:

could you point me to the most budget friendly setup for the programming

This would have to be Phonak iCube ll, compared to HiPro and cables stuff for the KS7.

All the software is windows based, although it’s possible to run on Mac OS, but requires using a virtual machine software, or bootcamp etc.

Here, also make offers.
But you really need to have an done, without this you cannot provide programming to ones loss by using the software.

https://www.ebay.com/itm/165595641501?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CEqhI8m8TBO&sssrc=2349624&ssuid=1JgE2Y3TTNC&var=&widget_ver=artemis&media=COPY5

https://www.ebay.com/itm/165633450852?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=GX3YP2E3QvS&sssrc=2349624&ssuid=1JgE2Y3TTNC&var=&widget_ver=artemis&media=COPY6

ok, thanks. yes there is an .

are you saying the icube II can be used to program the KS7’s along with connexx software?
and either way which cables are required - is there a photo or diagram of how everything connects up- hearing aids - to programming box - to computer? (i realize the hipro can have diff. ways of connecting to the PC).

thanks.

@jaybradley said:

are you saying the icube II can be used to program the KS7’s along with connexx software?

No, Phonak iCube ll is a different brand from the KS7, strictly for Phona/Unitron .

Actually I’ll send you the software, as you can check within Connexx yourself what programming cables and pills are needed, or the Connexx Link wireless programming device.

https://www.ebay.com/itm/325193367410?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=wZczwfBPQX6&sssrc=2349624&ssuid=1JgE2Y3TTNC&var=&widget_ver=artemis&media=COPY4

We don’t know if the short/3-pin cables (referenced in the EBay link above) will work the same as standard CS44 4-pin cables! They were made for an old obsolete device named NOAHlink (not to be confused with Noahlink Wireless). I know from personal experience that they don’t work for Oticon!

c2

Here’s a link that explains it with pictures (click it);

DIY - How to get started with self-programming
Be careful when ordering #2 cables (any #2 cables). Here’s why. If you have the luxury of ordering from Bernafon or even the luxury or ordering by specific part number then Yes, you can order (Bernafon HI-PRO #2, Left: 384-20-033-00, Right: 384-20-032-00). But most ppl will not be ordering from Bernafon. On EBay you seldom see hearing aid programming cables listed by part number, or by the hearing aid manufacturer’s pet name. If you order #2 cables from EBay you may end up with the wrong cable…

As an aside, you would need to look at the revision history of the OP/Original Post in the above link to find its (buried) true origin :wink:

image

In reply to @jaybradley

@jaybradley said:

is there a photo or diagram of how everything connects up- hearing aids - to programming box - to computer?

It’s like this other/different Signia hearing aid linked below;

DIY - How to Self Program the Signia Pure 13 BT Primax
There are two methods of programming the Signia Pure 13 BT Primax hearing aids. Wireless programming with the Noahlink Wireless programmer Wired programming with (mini Pro/Hi Pro), CS44 cables and Programming Adapters/Pills For both methods (wired and wireless programming) you will need the current version of Connexx fitting software. Wireless Programming: The Noahlink Wireless programming device can be used to program the hearing aids wirelessly. [color=red]Caution: Signia requires a wire…
@jaybradley said:

ok, thanks. yes there is an audiogram.

Oh, good. Can you post a picture so that we don’t lead you in the wrong direction?

NOAHlink cables do come in all the different types, but No.2 is 4 Pin. There’s others that are 3 pin and even 6 pin

Screenshot_20220903-071950_Office

To me it just sounds better for the OP to ether get the ConnexxLink wireless or go with a easier way with the Phonak and iCube ll. Or even better that can use Noahlink wireless.

To the OP have you tried Costco in your area?

Perhaps NOAHlink cables do come in various flavors as shown in your image of a NOAHlink #2 cable with 4-pins. Though, I doubt that you can find one of those listed for sale.

However, I just now pulled these two NOAHlink Oticon #2 cables out from my desk drawer.

  • I can see with my eyes that they are 3-pin cables.
  • I can say from personal experience that these NOAHlink cables do not work for Oticon hearing aids using a Hi Pro or mini Pro hearing aid programming device. Maybe they will work with NOAHlink.

But the basic question is will the EBay listing of (Sonion NOAHLINK Programming Adapter 312 and Cable Pair CS44) work for KS7s. I dunno. You could try it and find out. I wouldn’t. I would look for standard CS44 cables instead.

c1
c2
DSC_2060

Yeah that’s the thing, can we be 100% sure they are correct,they should… but yes definitely the 3pin won’t work as you know, when I look on eBay,the HiPro and cables are getting hard to find and some are at “out there” prices, I know I won’t go back to using a HiPro!

Yep, I haven’t used my mini Pro for a long time. I am curious to know if the op is trying to deal with a moderate loss or a severe/profound loss?

Yes it would be good to see her , this will determine if the KS7 would even be suitable, however he mentions “just wanting to have mum back in the conversation” in the noisy environments, so could be just moderate to severe in the higher frequencies for a young 80 year old.

Related discussions