Skip to content
HearingTracker
Log in

Phonak Target 7.3 software download

83 replies13.8k viewsLast reply

Jump
Link to this topic
Reply

Hi there, sure, hopefully you have everything else you need for any projects.
Do read the user guides as well,very helpful for setting up the first time.

I also had CD1 asking me for Target 6.0 two days ago, i gave him a link to the latest version but he specifically wanted 6.0 because his V90s would probably work better with that version.

So then i uploaded him 5.1 as well (updates to 6.0) and asked him why the older version of Target would work better, but didn’t get a response.

Does anyone know why 6.0 would work better for the V90s as opposed to the latest version?, i’m curious to know.

@nazlink

Maybe it’s down to this?
Read the whole thread.

Have I bricked my Phonak Aid?
[Screenshot 2022-12-28 062111] I can not connect my Aid to software. It comes up with this message every time I try and factory reset it or try and sort firmware update. I have tried many times. [Screenshot 2022-12-28 062808] I was not even trying to do the firmware as the firmware has not been updated for a long time. I had a new battery in it as I always do. Can I scream, argh argh argh!!!
@nazlink said:

fixed in 9.1.1

Unlikely as it’s an old Aid. Phonak are very quick not to support this older Aids. They don’t even support Marvel Aids with the App and saving custom programs.

Yeah I wouldn’t think so as well, iCube ll isn’t supported on 9 anyways, I think the last 8.1 or something, so that leaves HiPro only :face_vomiting:

Can you give link to Phonak Targets software please - Want the software before I buy hearing aids for my wife so we can trim the frequency profile without issue and supplier free.

Welcome to the forum, great your willing to give a go, however you’ll need the correct programming device for any DIY projects (this is determined by which you have) do read the user guides as it’s very helpful for setting up the first time.

Welcome to the forum, great your giving a go, it’s all pretty easy enough but do read the user guides as it’s very helpful for setting up the first time.

Hi all. Thanks a lot for this site, which has helped us a lot over the years. Currently going through more than the usual challenges with audi. New hearing aids are Phonak Nathos Nova M (battery type). I’m about 90% sure these will connect via Noahlink and if someone could confirm that would be great.
Would really appreciate a link for Target to try to get us back to a better set up.

In reply to @Mark13

Welcome to the forum, great your giving a go, it’s all pretty easy enough, there’s plenty of us to help you along if needed, and yes you’ll be fine with the Noahlink wireless.

Welcome to the forum, great your giving a go, it’s all pretty easy enough but didn’t forget you’ll need the Noahlink wireless programming device and do read the user guides as it’s very helpful for setting up the first time.

Welcome to the forum, great your giving a go, you’ll need to buy your own Noahlink wireless programming device, easily available on eBay and Amazon.
Do read the user guides for target as it’s very helpful for setting up the first time.

Hello Tenkan, i’m looking for Phonak Target, (the fitting software i guess). could you send me the download link please?, thank you.

Related discussions