Skip to content
HearingTracker
Log in

Danalogic Ambio software

130 replies4.9k viewsLast reply

Jump
Link to this topic
Reply

In reply to @JohnD2

@JohnD2 said:

How do you mean please.

Open your battery doors to turn them off and then close the battery doors to turn them back on again. You then have a couple of minutes in that the NL Wireless will pick them up. Longer then that and the NL Wireless will not pick up the hearing aids.

I can confirm no unlocking code needed.

Both my Ambio and Ambio Smart aids connect straight up with Noahlink Wireless and Wireless 2.

As mentioned by @Zebras and @menglxs , ensure Bluetooth is off on any device your hearing aids are connected to and restart the hearing aids so they are in discovery mode.

Hi, I have Danalogic Ambio S 98 and I am really frustrated with them, and the long waits between appointments to sort them out. My main complaint is the quality of music through these aids (I grew up using analogs). Each hearing aid is programmed differently despite my asking them to make the aids like analogs. Is there a fitting software out there that I can buy or use to programme the hearing aids myself?

I have also very recently been given Danalogic Ambio Smart 98 aids, on the paper the audiologist gave me it says the “firmware” is 1.18.1.1 , although whether that refers to the programming software or the on-board hearing aid software I don’t know.
I don’t have a pressing need to learn how to tweak the hearing aids, but I would like to know if I can, if I were to go out and buy a noahlink wireless 2. What software do these ambio smarts need and can I receive a copy of it?

The firmware version is for the , and yes it’s quite easy for any projects on ones HAs, so getting a Noahlink wireless is a good idea, you can use if in just about any late model HA from the big 5, so if you decide ymto change brand you’ll still have the option to DIY.

hi, I have Danalogik 6, ifit, 71, 81. I want to give them to people, but I don’t have the software to configure it, as I understand it, Danalogik 1.15 will suit me. please give me the program.

Welcome to the forum, great your giving a go, please be sure to research and read the user guides before starting your DIY projects as it’s very helpful for setting up the first time, are you sure you want to do this for other people? You’d need to be very careful and I wouldn’t recommend it.

yes, I will do everything with my audiologist, namely, the examination and monitoring of the patient will be on him, I will be on the technical part, equipment, connection, cleaning, drying and repair

ok, the older version does not have this model. I found out that the older program aventa i fit is required, another name is danalogik i fit. help me find it please.

Hi there, unfortunately I don’t have a source for this, hopefully someone will be able to help.

Hi there, great your giving a go, be sure to do some research and read the user guides before starting, you’ll need the Noahlink wireless programming device as well for your DIY projects.

Is anyone able to send me a link to the danalogic software please.
I have Noahlink wireless for my Resound aids, Just need the Danalogic software for my backup aids.
Thanks

Related discussions