Skip to content
HearingTracker
Log in

Roger On installation and pairing

This topic is closed.

38 replies4.1k viewsLast reply

Jump
Link to this topic
Edited

Unable to pair new Roger On with Paradise Pro. Is there something in Target I need to do? or???
Update: needed Roger On IN. I was able to set up independently. First pushed button under clip with a something small enough this step puts receivers in hearing aids and then pushed button at bottom of device to pair to Roger. Only problem is I am not happy with the sounds. Very unnatural

12 people in this conversation8 min readJump to latest

What receivers are you using? Licenses from an iN version of Roger or ones from Roger X? From your post, I’m guessing neither and that may be your issue.

Yea I don’t think you are talking about the receiver in my ear, are you? So like a connection receiver, no. Is that going to move me from to going to Audiologist

It’s possible to do it yourself, although easier if you’d bought a Roger On iN. (The iN has the licenses built in and it’s a fairly easy transfer. With the Roger X receivers, one needs an installer. There’s lots of stuff on here about it. Maybe @Zebras will chime in.

If you can return your Roger On and get it replaced with a Roger On iN I believe that would be the simplest. I’m assuming they’be buying a new one. If buying used, you need to make sure it still has both receivers present. If you to an audiologist with your current non-iN version, you’d also have to buy two Roger X receivers. Is this making sense?

@Emile030

@MDB

Roger Select iN and Roger ON iN
The only way it’ll work is the get a Roger On iN or 2 x Roger X receivers which cost around $350 to $600 each and use a Roger Installer. [image] This is a Roger Installer. This little machine. https://forum.hearingtracker.com/t/phonak-pdf-on-how-to-install-and-uninstall-the-receivers-licenses-in-to-out-from-a-hearing-aid-from-a-roger-in-microphone/69030?u=zebras [image] Plus Lumity now slight_smile

Just to add to the discussion for non American…

The Roger In devices are not available in Europe! they told me.

Over here we only can have the On versions. My audicien only can sell me the On and programm the licenses with the installer from the Roger X devices. So I need to buy two from them also. Sonova policy for Europe he says.

A cheaper way then would be the On In from eBay as you do not need anything further, also excluding the audicien.

Edited

@lmiller See videos below:

Unboxing the new Phonak Roger On:

How-to: Installing Roger On iN Receivers:

Quick guide - pairing Phonak Roger On to receiver:

Using the Roger On :

How to install Roger receivers:

Roger On:

One other alternative, as yet not discussed on this thread, if you have an inductive loop/ on your hearing aids, you can buy the “Roger Neck Loop”, in the UK around £130 to £150 new, (Type 03) you can pick them up used, and cheaper than that on eBay, or the (Type 02) for around £350 new… Again cheaper if you buy used, via eBay, I do have this Roger Neck Loop (Type 03) bought new, as yet untried, so I can’t vouch for how effective it is? But, it is probably the cheapest method to connect a Roger On device… Remember also, if you are buying 2nd hand Roger X Receivers, they need to have a serial number above 1744, Roger X Receivers prior to this serial are older technology, and will not work with Mavel, Paradise or indeed Lumity aids… Cheers Kev :wink:

Related discussions