Skip to content
HearingTracker
Log in

Download Target software

147 replies8.1k viewsLast reply

Jump
Link to this topic
Reply

Hi there, unfortunately you won’t be able to use the iCube ll for the Lumity platform, you’ll need the Noahlink wireless programming device instead, very easy to get from eBay.
Please read the user guides before you start your project as it’s very helpful for setting up the first time.

Target user guides.

Target User Guide | Phonak29

This guide provides you with a detailed introduction to hearing instrument fitting with Phonak Target.

Welcome to the forum, sure it’s available, but do read the user guides as it’s very helpful for setting up the first time.

Welcome to the forum, sure it’s available but do read the user guides as well as it’s very helpful for setting up the first time.

Hi all, I will be upgrading from Phonak Nathos Auto M hearing aids to Phonak Nathos Auto Nova M aids. I always adjusted my own programming with my old aids, using the Phonak Target 6.2 software and an Icube II. Just wondered if anyone would be so kind to answer a few questions:
Do I need to get a Noahlink, or will an Icube II work with the Novas?
I believe the Target software will need to be updated, is there an updated version available? If so, will my old NHS code still work in the software?
Many thanks

Yes looks like those Nathos Auto Nova are the Marvel or paradise platform, so the Noahlink wireless programming device would be required, as for codes for later NHS models you’ll need to ask @Zebras or @kevels55 who have experience with these.

Welcome to the forum, sure, great your giving a go, target software is pretty easy enough to use, but do read the user guides as it’s very helpful for setting up the first time.

A family-member just got Phonak Audeo L-90 hearing aids and is not very happy with the settings. Before going back to the company / person who did the set-up, I would like to check the current settings and understand what was done and what is still possible. From comments on this and other sites I understand I would need NoahLink Wireless (2) (which I can buy at Amparex in Germany) as well as the Phonak Target Software Version 8 or 9. I have already read the user guides. Can someone please provide a link to download the software.

Welcome to the forum, sure and it’s great you’ve done some research before starting, actually you can use Noahlink wireless, doesn’t have to be version 2, also be aware that the Audiology clinic will know that adjustments have been made, sometimes that’s not a problem, but some can get a little annoyed that “their” settings have been changed :roll_eyes:

Related discussions