Skip to content
HearingTracker
Log in

Signia Connexx software

513 replies15.5k viewsLast reply

Jump
Link to this topic
Reply

Thank you sir, I have noahlink wireles.
I have some knowledge about software, but I learned a lot from your web form page. It asks for access permission for the software. Can you send me the link? Can you help?

Thank you. Could you also link me to the location with all the documentation on . I had it yesterday but can’t find it now. Will bookmark this time. Possibly not the place in this thread but could also do with a link to Resound Smartfit due to getting a pair of Nexia 9s to test

Hi again, great your giving a go, anything you need to know just ask or post a new topic, there’s plenty of us to help you along if needed.

Hello, could I please also receive the Connex software, I have a new Signia Pure and I would like to adjust it myself. And do you perhaps have a hint where I can get the “Noahlink Wireless 2” for a reasonable price?
Thank you in advance.

Welcome to the forum, great your giving a go, it’s all pretty easy enough but do read the user guides as it’s very helpful for setting up the first time, the Noahlink wireless programming device is available on eBay and Amazon as well.

In reply to @tenkan

Hi tenkan, have you ever come across a right signia receiver that shows up as a left receiver on the signia app and in the connexx fitting software? Is there a way to overcome this problem on the Connexx software, so that the app can control both hearing aids? Because right now, only one aid is recognized, and controlled at a time–since they both show up as a left.
I’m thinking that this must be a manufacturing error, and most likely the receiver needs to be replaced, but your input would be greatly appreciated before I order a replacement.

Hi there,hey that sounds weird, so it’s a right side receiver (Red) showing up as a left (blue) in Connexx? because I have not seen that before, could you show a screenshot of Connexx showing this, when in Connexx if you get a mismatch you’ll be asked to switch sides, or to fit the correct receiver.

Yes, a red receiver is showing up as a left. I will try to upload two screen shots in Connexx the software. I can program the right hearing aid, but I can’t over-ride in the signia app, so it limits it’s use to only controlling one hearing aid at a time–whichever it pairs with first. It also won’t allow me to control the directionality of the aids, since it only recognizes one at a time.

Screenshot (23)

Yeah it just looks like you configured them wrong way round, so you need to swap them around in the software, tick the correct side for each , that should do it.

Of course!!
Thank you!
I assumed a faulty right receiver because I tried to use the app before I programed
the aids. Hopefully once programed the app will work as intended and couple both aids.
I appreciate your taking the time to help tenkan.

Sure no problem, yeah the App will be fine to use once this is sorted in Connexx, cheers

Welcome to the forum, sure it’s never too late, you’ll need the Noahlink wireless and do read the user guides as it’s very helpful for setting up the first time.

Related discussions