Looking to purchase a Roger X 03 receiver

Sure. I have already purchased the Roger On V2. I tried to purchase the ‘IN’ version, but it’s not available in Canada.

The approach I then took was to get two Roger X 03 receivers, then get them transferred into my KS10’s via the Roger Installer. I managed to get one 03 receiver installed in my right aid, but need a second receiver for my left aid.

If you’ve already got all of that stuff, and the only thing you still need is the one receiver, then yeah, that’s probably not going to cost any more than any other option. You can often get used iN devices on ebay for $300 or less that either have licenses still in them, or can get more licenses via the Roger Upgrader. That might have been cheaper at the outset, and is still an option if you can’t find a cheaper receiver. At least then you’ve also got the extra device.

It took me a while to get the necessary Roger Xs for both my pairs. Ebay was my chosen route. Things to remember:

1. Make sure the serial number is above 1744
2. Try to ensure the license is still in it
3. A type 2 works just as well, and you can mix them.

Peter

I believe you need a Roger iN device to do that. There’s a recent thread where people discussed the possibility of using the Upgrader to get an additional license and transfer it to an empty receiver via the Installer, but I don’t think anyone managed to do it. If that was possible, though, you could just do it with the receiver you’ve already got.

@kevels55 does that sound familiar at all?

@CombatWombat said:

Roger iN device to do that. There’s a recent thread where people discussed the possibility of using the Upgrader to get an additional license and transfer it to

If you manage to obtain a empty Roger On iN or Roger select IN (without receiver licenses in the microphone) you can get additional licenses in the microphone by connecting it to PC with Roger Upgrader , and then you can transfer the new licenses from the microphone to your KS10.

Thanks to all - this seems to be starting to make sense now. I didn’t realize that a Roger On In or Select In could do the transfer back and forth to the HA’s without additional hardware. In Canada, for some reason, we can’t purchase the Roger On In V2 - hence I purchased the Roger On V2 and had to (somehow) acquire the licenses another way. So far I’ve acquired a license in my right HA and got a Roger Installer. I think my next approach will be to keep checking ebay, here for a Roger X with the SN > 1744, or maybe get a Select in with the licenses in them. Whichever approach is cheaper.

Sorry - one more question if I could - I can’t find any instructions on how to transfer licenses from and back into the select in. Can anyone help me?

Thanks

Here you go!

A Select iN with no licenses should also work here as long as it comes with the base unit, and will probably be cheaper. You can add more licenses via the Roger Upgrader. Actually, I’m not sure if you need the base unit for that or not - I’ve never tried to use the Upgrader by plugging it in directly.

Just curious: Can you purchase other iN devices through normal channels in Canada? I’m just trying to figure out the rationale behind making the On v2 iN unavailable.

@threluja Transfer Phonak Roger X receivers between hearing aids - #31 by Zebras

Thanks @Zebras for the guide

@firenzel and @raylock1 for the pointer.

All sorted, licences in both set of aids and two backup, nice.