Signia streaming mic question

Yeah I’d make up a music program for listening to your stereo, plus have a program for noisy environments, as for the streamline mic, your using this because you have an android phone I take it? watch the video to make sure your in the correct “stream” the LEDs change colour depending on what your streaming, orange for music from your phone, sounds like you might be in “remote microphone mode” led shows purple?

I haven’t bothered using mine for many a year (battery run time was pathetic) but from memory it was Audio Streaming and then “Audio” make sure to use the microphone attenuation setting to get more streamed sound in and less environmental (background) noise out.
If you want more on the right then “uncouple” and just add a bit more on the right, the programming is done on the fly in Connexx.

One other thing, have you got the Signia App, go there when using the streamline to see what additional adjustments are available.

thanks i had someone tell me for streaming the tv streamer that i had to connect then adjust in the audio streamer section i the tv tab and then save and disconnect to make the change stay in the aids. that is what i did for this mic but i used hands free tab to make some adjustments and doing that procedure seem to not make much difference. and the sound i got was terrible. when i talked it was boomy and lots of echo. and it did not seem to make any difference. but i was in the magenta color on the mic.

i figured i may have to uncouple them to make separate adjustments but i need to know what tab in the audio stream section i use for this to just be a mic.so i can hear surrounding sounds when i turn it on. if this can be done on the fly then it will be easy enough to adjust. but the tv streamer i have to save and disconnect all the time what a pain that is.

when i first turn it on i get a flashing orange light that may be pairing, then that turns solid orange. i do not seem to hear anything different in the aids. when i press the top button again i get a magenta color and i hear beeps in both aids. when i touch the mic i hear rubbing in the aids but only the left.

i hear clicks when i adjust the + - buttons in the left. no sound for low or high volumes. that may be in the fitting software yet to be changed.

if i press it again i get orange and no sounds when i touch the mic so that might be bluetooth but the tv gets louder in the right ear and i hear beeps for top + volume. i can hear my voice in both ears and i do not get sounds when touching the mic. it seems to make the wife and the ve louder. but only the left ear makes any beeps for vol adjusting.i hear loud medium and low beeps in the orange setting

thanks

ok, i tried to do some fitting of this streamer mic and i just do not know what tab to use for using this mic for setting on the table and sending sound to my aids.

when i turn on the mic i get a flashing orange light it flashes for maybe 20 to 30 seconds and then turns orange. but i can tap the mic and i do not hear the tap but if i hold the top button until the light turns what i call blue but the wife calls magenta i can tap the mic and i hear the taps. but then i hear loud echo type sound in my aids and it feels like more in the left.

so tell me is the audio stream the type that just hears the same sound as the aids do but then sends that sound to the aids? or is it the bluetooth that does that? i ask because when it powers and after the flashing orange light it stays solid orange. and per the above video that is audio streaming.

also what tab do i use in the audio streaming section of the fine tuning? if i want to use this for setting on the table or my pocket and make it help me hear the wife a bit better do i use the audio of the hands free? i know the tv is for the tv streamer i now use. oh will the mic do live adjustments or will i have to save the change and then disconnect the noahlink to get the mic to start the new settings? my audi told me she thinks the mic does live changes and saves when i disconnect. thanks