You’re ignoring this member’s posts.
Difference programming cable cs44 and cs44 phonak type
This topic is closed.
36 replies40.2k viewsLast reply
My measurements were careful. I will look for another extension with 6 wires.
Since you are only really using 4 of the wires the extra 1 or 2 wire(s) you mentioned are not active in use anyway. Assume the cable is staight-through (wires are simply connected pin-to-pin), just leave the extra wires connected as they came but reverse the two wires (pins 3 & 4) that you mentioned.
You’re ignoring this member’s posts.
Since you are only really using 4 of the wires the extra 1 or 2 wire(s) you mentioned are not active in use anyway. Assume the cable is staight-through (wires are simply connected pin-to-pin), just leave the extra wires connected as they came but reverse the two wires (pins 3 & 4) that you mentioned.
With only four wires you would need those 4 wires connected to pins 1, 2, 3, 4. One of the four wires was connected to pin 5. The result is that pin-2 has no connectivity.
Sorry, the picture was lost.
You’re ignoring this member’s posts.
You’re ignoring this member’s posts.
I ordered another Mini-DIN 6-pin extension cable from EBay. Paid only $1.59 total. Though it’s another 4-wire extension with no wire for pin-2. Darn!
Can someone give me an EBay (or other) source for a 6-wire extension?
You’re ignoring this member’s posts.
These are sources for 6-pin Mini-DIN male/female connectors that you could use. You would just wire up your own adapters.
DIN Connectors
http://onlinecatalog.digikey.com/WebProject.asp?CodeId=7.2.0.17&BookCode=dey09flx&PageLabel=44513
<CITE>www.mouser.com/catalog/637/1304.pdf</CITE>
You’re ignoring this member’s posts.
Here is a source for 6-pin Mini-DIN male/female connectors that you could use. You would just wire up your own adapters.
I would prefer to start with a 6-wire, 6-pin extension that already has wires connected to each pin. We already have two successful projects with these. All I need is to know where to obtain one.
If no one has a source then I guess I could I could take my multimeter to a local computer store and test the connectivity of pins 1-4 on the stock of Mini-DIN 6-pin extension cables.
You’re ignoring this member’s posts.
This manufacturer specifies the connections. It’s a coiled version but a call to them may locate what you are looking for.
You’re ignoring this member’s posts.
for those who wondering where I got it it is this same one http://cgi.ebay.com/6FT-PS-2-MALE-FEMALE-KEYBOARD-EXTENSION-CABLE-/200474062290?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2ead2f6dd2#ht_2582wt_90235
or e_bay seller id : pcmicrostore , search for keyboard extension cable
Good luck, and also I have a pair of oticon #3 cables (aprox 5ft long) for sale… asking $65+S&H if someone is interested. PM me.
You’re ignoring this member’s posts.
for those who wondering where I got it it is this same one http://cgi.ebay.com/6FT-PS-2-MALE-FEMALE-KEYBOARD-EXTENSION-CABLE-/200474062290?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2ead2f6dd2#ht_2582wt_902
or e_bay seller id : pcmicrostore , search for keyboard extension cable
Good luck, and also I have a pair of oticon #3 cables (aprox 5ft long) for sale… asking $65+S&H if someone is interested. PM me.
I ordered 2 cables from pcmicrostore. Thanks to all.
You’re ignoring this member’s posts.
I ordered 2 cables from pcmicrostore. Thanks to all.
Success!! If you want to see pictures of my project to make a CS44A Phonak programming cable, Click -> HERE86
You’re ignoring this member’s posts.
Hi Revolter. There seems to be a contradiction in your instructions.
The write up states that pins 3 & 4 of the DIN are essentially swapped in order to change from a CS44 to CS44A cable. However, looking at the wiring diagrams (last 2 photos) it indicates that pins 2 & 3 of the DIN are swapped.
Which is it?
You’re ignoring this member’s posts.
You’re ignoring this member’s posts.
You’re ignoring this member’s posts.
Hallo Juergen.Nachdem Du aus Deutschland kommst, möchte ich in deutsch mit Dir kommununizieren.Ich bin seit 3 Tagen im Forum registriert und hätte Fragen
zur Hi-Pro Schnittstelle.Könntest Du meinen Wissensdurst befriedigen,so melde Dich irgentwann bei mir.
Dank voraus
Paul
pcarra@freenet.de
You’re ignoring this member’s posts.
Jürgen ist seit etwa acht Jahren nicht erschienen. Versuchen Sie Englisch auf Deutsch Online Übersetzung.
You’re ignoring this member’s posts.
You’re ignoring this member’s posts.
Related discussions
Hearing Aids24 replies
Hearing Aid Self-Fitting (DIY)10 replies
Hearing Aid Self-Fitting (DIY)3 replies
Fitting Software Requests869 replies
Fitting Software Requests181 replies