So I got the 3% fluid, and some bottles to try the mechanical version.
After some tries, I went a different way.
I measured the diameter of the proway filters, that is 2.0 mm. I made a 2 mm hole in the bottle cap. Not in the center beauce that is a mold insert most, so not so even. I pushed the filter in, and first tried with air in and out, that cleaned it partly. Then put some water in the bottle, and pushed that through the filter, and bingo, a clean filter. The same works for smaller filters only a new bottle was needed. And the bottle should be soft plastic, not the sort where Red Bull and cola are made from. It’s just that the bottle isn’t made for pushing hard.
Maybe it works even better with warm water. I cleaned 18 filters this way.
Before
After
