Resound LiNX Quattro RE61 - Amplifon locked?

Yes, my were locked, but I don’t feel like I should be sharing said code here. Even though, I don’t think it’s the same for every HAs from Amplifon.

The prompt for the code is quite obvious and I can confirm that this is not showing in the video that @user440 just recorded.

That doesn’t rule out the HAs being locked. But he’s just on the previous step: trying to connect to the HAs. He doesn’t need the PIN yet, provided their HAs are locked.

ETA: Also have you tried entering the code into the (Activate PIN Code When Programming). Perhaps it is there to lessen the burden on your Audi having to enter the code over-and-over for each of his customers.

This functionality allows the audi to instantly lock a previously unlocked hearing aid with a PIN code upon programming. This is for locking, and not for unlocking.

It seems to me like a Noahlink issue of some sort.

@OpenFitted said:

I don’t feel like I should be sharing said code here

Thanks, can you share whether it was numeric/alpha-numeric and the length?

OpenFitted

Spain

Numeric code, 5 ciphers.

I am creating a new School document named (Locked Hearing Aids). Does this seem correct for the ReSound SmartFit section? Tip: you can click the image to enlarge.

user440Author

Had to wait hours because forum prevent new users more than 8 messages at first day

The driver seems to be correctly installed and the version from the https://www.himsa.com/2 website and the one provided by SmartFit are the same.
The NoahLink Wireless blinks green lights every 3 seconds even in idle mode than in searching mode.
The images capture just the green light, but it blinks.
Everything seems fine.
Here’s a (big single) image that shows basically everything.

@user440 said:

The NoahLink Wireless blinks green lights every 3 seconds even in idle mode than in searching mode.
The images capture just the green light, but it blinks.

HMm; My Noahlink Wireless lights turns green when I plug it in. After one or two seconds it shuts off and the lights stay off until I begin to use the device.

user440Author

Yea, when I put the NoahLink it flashes green lights and then they stay off.
Obviously when the device is unplugged the lights are off.
The green lights keep blinking if the Smart Fit software is running.

Oh okay, I am running out of ideas??

On this other → Locked Amplifon thread I believe those were newer hearing aids (ReSound One’s) newer than LiNX Quattro. So I think we are dealing with a different style of locking than the locking mechanism encountered in that other thread. GN ReSound has a long history of locking hearing aids as referenced in this clip from Costco Hearing Aid list. Sad part is; we never found a solution for the older ReSound locks. Tip: You can click the image to enlarge.

OpenFitted

Spain

In reply to @pvc

Thanks. Although I’m not sure about “Upon reconnecting a locked hearing aid you will be prompted…”

In my experience, I’ve only been prompted the very first time I connected the . SmartFit remembers the PIN code for the subsequent programming sessions.

Also… Does anybody know how to reach out to the software team that developed SmartFit at GN?

Now that would be a treat! You will be lucky to talk to the gatekeeper.

user440Author

Mar 22, 2023Edited

So, taking a look around I’m pretty sure these rebranded devices have modified firmware and modified version of the fitting software.
First of all they’re heavily customized. The custom labels on the and also the codes inside the HA!
So it’s pretty obvious that who built them (Resound most probably), built them for amplifon!
Second, it would be stupid to “lock” them only software side (Smart Fit). And how would they even do this practically? They have to detect the HAs and then decide that this one is rebranded and cannot be shown to the user. So the software have to do some calculation to decide this or consult some database of some kind. If so they would have to include this database in the installation since the software should work even offline.
Most probably the existing firmware is custom to Amplifon and the software is custom to Amplifon. This would make sense from a commercial pov too.
Moreover i found this link showing a computer screen showing some similarities to Resound Smart Fit software called Amplifon Smart Fit 1.0. This could be fotoshopped btw.

Is 2020 The Year That Remote Hearing Care Takes Off?
Remote hearing care or tele-audiology has been around for a while, but is 2020 the year it finally moves mainstream? There are definite signs to say so

The same image shows at this video (https://vimeo.com/2671312956) at time 00:54.

These are the photos of the heavily rebranded HAs.
The R 3 XQ stands for LinX Quattro and it’s inside the hearing aid!
So yea, I guess this is the end of story.

Moreover there are tons of these himsa documents one can find on google or by carefully searching their site, that mention some Compliancy tests and the list of software those tests has been run against. One can see in this example a “Smart Fit 1.9.0.169” and a “amplifon Smart Fit 1.9.0.125” so yea, there exists a customized version somewhere behind closed doors.
One can run some searches with “Costco Smart Fit” and find out those custom software exists too.
This user mention one btw : Why is there no discussion about Miracle-Ear hearing aids? - #22 by jay_man2
This fact is mentioned in School for Costco as well.
… and those documents Doručování veřejnou vyhláškou - SÚKL2 clearly show that exists custom versions for amplifon, cotsco and this “CS Smart Fit” too
https://www.himsa.com/wp-content/uploads/2020/11/SmartFit1.9.0.169SolusMax1.9.0.139Audigy2.9.0.104amplifonSmartFit1.9.0.125IMCComplianceTestReport.pdf13

tenkanProvider

Good detective work, in both my posts 2 and 8 I mentioned the SmartFit with the special sauce for Amplifon, obviously one day you may find it.