Phonak Roger Inspiro Question

Hello @Gilbert… You would need 2 x, Roger X (Type 02) Educational Receivers with serial numbers above 1744, a Roger Installer to activate the Roger X Licenses into your Marvel aids, only Roger X (Type 02) work with the Inspiro, and all other Roger devices… Roger X (Type 03) does not work with Inspiro, and only works with certain Roger devices! Within each individual Marvel aid, it has 2 licensing slots, 1 for (Type 02) and 1 for (Type 03), both (Type 02 & 03) Licenses can be held in their slots at the same time… Although, I have in the past, mistakenly installed 2 x, Roger X (Type 02) into one aid, I never noticed the aid was still switched on… A local friendly A.uD, who works with Phonak aids would be helpful, it takes about 10 minutes max to install the Licenses with the Roger installer… I can’t remember if you also need Roger Touchscreen with an Individual Inspiro, it’s been a while since I have used the Inspiro & Touchscreen, I don’t think you do, I could be wrong though? If you where linking say, 2, 3 or 4 Inspiro’s, then yes you would… I hope this helps, good luck, cheers Kev

Make sure you activate the 02 receivers in your HAs as 03 won’t work.

02 is more expensive and 03 is cheaper.

Inspiro is actually really old now and discontinued.

Many thanks. Now I understand.