Skip to content
HearingTracker
Log in

Phonak Target 8.02 software- downloaded, how to install?

301 replies13.8k viewsLast reply

Jump
Link to this topic
Reply

Hi there, yes sure you could, it’s not that hard at all, just be sure to read the user guides and you can use target software in simulation mode to see what you can do and how it works before actually doing adjustments.
Yes the older Siemens brand can be adjusted with the correct software/hardware.

Thank you. I haven’t worn the old Siemens for a few years. I’m thinking maybe it would be a good idea to try programming them so I don’t mess up the K10s. How do I find the software & hardware I’d need to use to work on them as sort of practice! All I have are the Siemens , no apt or anything at all. I don’t even think they have bluetooth in them but I do know they have the coil in them because I had used them that way years ago.

@ggreenone said:

I’m thinking maybe it would be a good idea to try programming them so I don’t mess up the K10s.

Don’t worry about this, if you follow the instructions I sent you’ll make a backup of the KS10’s programming, so you’ll always be able to go back to those original settings, now as for those Siemens we’ll need the exact model, but most likely you’ll need the HiPro and cables and older version of Connexx software, the HiPro can be expensive and a bit of a hassle to set up, might not be worth it in the long run.

Welcome to the forum, great your giving a go, don’t forget you’ll need the Noahlink wireless programming device for the later models from Phonak, do read the user guides as it’s very helpful for setting up the first time.

Edited

Hi @tenkan , sorry to ping you! I’ve joined this forum as I am looking for a copy of Phonak Target 8.0.2. I have a pair of old Nathos Auto that I would like to try and reprogram. I think I also will need to enter a code according to another topic on this forum to access the list of NHS HAs but I will come to that once I have Phonak Target installed. I am wondering if you could DM me a copy of the software? Many thanks

Edit: now have the software, thanks Tenkan!

Welcome to the forum, great your giving a go, I’m sure you’ll find it easy enough to do, do read the user guides as this is very helpful for setting up the first time.

Hi there, great your giving a go, don’t forget the hardware requirements, most likely a Noahlink wireless programming device, hopefully your new PC is not ARM based as the Noahlink won’t work in this situation, do read the user guides as it’s very helpful for setting up the first time.

Welcome to the forum, great your willing to give a go, it’s all pretty easy enough but do read the user guides and of course you’ll need the correct programming device, from Marvel platform onwards the Noahlink wireless programming device.

Thanks a lot, that worked.
I wonder why we all have to go throug this scary process of finding this forum thread and then trusting somebody with a google drive link. Instead having an official download button for the version would be so helpful and also you wouldnt have to deal with everybody who need the software :slight_smile:

@Member288 said:

Instead having an official download button for the version would be so helpful

Unfortunately unlikely to happen as we aren’t actually allowed to have the software.

Welcome to the forum, great your giving a go, it’s all pretty easy enough but do read the user guides as it’s very helpful for setting up the first time, and don’t forget your Noahlink wireless programming device.

Related discussions