Skip to content
HearingTracker
Log in

Phonak Target 8.02 software- downloaded, how to install?

302 replies13.8k viewsLast reply

Jump
Link to this topic
Reply

Welcome to the forum, great your giving a go, it’s all pretty easy enough, but do read the user guides as it’s very helpful for setting up the first time, and if course don’t forget your Noahlink wireless programming device.

Hello, I have dabbled a bit with my older Beltone aids and Solus Max. I’m now ready to fine tune my KS10’s with the Target software. Could someone send me a link?

Thanks for all the info provided here in the forms. I’m reading the Phonak guide now too!

Marc

Welcome to the forum, great your giving a go on your KS10’s yes always good to read the user guides as it’s very helpful for setting up the first time.

Hi there, yeah great your willing to give a go, good idea to get familiar with how target works, there’s a demo mode to play around with it all.

Hi there, great your giving a go, do read the user guides as it’s very helpful for setting up the first time, and don’t forget you’ll need the Noahlink wireless programming device.

Welcome to the forum, great your willing to give a go, which models do you intend to program, you’ll also need the correct programming device for any DIY projects.

Hi there, great your giving a go, it’s all pretty easy enough but do read the user guides as it’s very helpful for setting up the first time and don’t forget the Noahlink wireless programming device.

Hi there, great your giving a go, don’t forget you’ll need the correct programming device, most likely the Noahlink wireless for the Marvel platform onwards.

Hi there, thanks in advance, please can you provide me with the link to download phonak target 9 or above?
thank again

Hi there, great your giving a go, be sure to do some research and read the user guides before starting, you’ll need the Noahlink wireless programming device as well for your DIY projects.

Related discussions