Skip to content
HearingTracker
Log in

When Will Auracast Actually Be Enabled for Phonak, Oticon, Signia, etc.? (From a Device Maker’s Perspective)

162 replies11.2k viewsLast reply

Jump
Link to this topic
Reply

@tenkan Thanks for your response. My question was for @PhoebeY , in the context of her remarks about .
My understanding is that hearing aids must be designed, built, and tested in compliance with Apple’s license - isn’t this correct?
If yes, it would seem to me that the communication interface with Auracast would be very important, and it would impact @PhoebeY ‘s work and concerns. AirPods Pro 2 features come to mind, for example.
Thanks again.
Best, Bob.

In reply to @GrayGhost

Phones don’t have to be capable. Only the hearing aid has to be. The Auracast Assistant in the app just tells the hearing aids to stream the Auracast broadcast. The hearing aids are the devices searching for the broadcast and not the phone.

To reinforce this point:

Here is a picture of the ReSound/Jabra app running on a 12 year old iPhone 5S with active:

IMG_7528

In reply to @StataHA

Sadly, many of the folks developing the Assistant apps misunderstood this point and want to require Bluetooth 5.2-5.4 on the cellphone itself in order to run the app. I’ve been testing a number of earbuds which claim to be Auracast-capable (and which probably are!), but it’s impossible to get them to operate without an “Assistant App”, and their App requires a much newer phone to enable Auracast. Prime example: Sony’s WF-1000XM5 earbuds; perhaps Sony is expecting everyone to purchase a $1000 Sony Android phone ?

In reply to @Ranson

Just received my FlooGoo, and have been running tests v EarFun Air Pro 4 and hearClear earbuds. The Win11 version of the FlooCast app sort of works, but needs some substantial additional polishing. Even with the “Dongle State” and “ State” and “Codec in Use” panels, it’s still difficult to tell what’s going on.
The User Guide isn’t all that helpful, either.
What’s needed is a tutorial for broadcasting: here’s how to set up the transmitter, here’s how to set up receiver #1, here’s how to set up receiver #2, etc.
Also, the instructions for vanilla Linux (Raspbian) on a Raspberry Pi don’t work – at least on the most recent version of 64-bit Raspbian.
Also, I notice that appears stuck at 24kHz – I assume that this is due to the fact that most hearing aids can’t handle higher rates? I was trying to broadcast LC3 to EarFun and hearClear earbuds which can (I think) handle 48kHz LC3 ??

Thank you for your feedback — we’ll take your suggestions into account as we continue improving the firmware, app, and documentation.

For setting up the FMA120 as an receiver, we have a dedicated manual available here:

To enable 48 kHz broadcast, simply turn on the “Broadcast High-Quality Music” option in the app, then reset the dongle for the setting to take effect.

One helpful feature of the FMA120 is that once your headset, earbuds, or hearing aids are paired, you can switch to broadcast mode directly within the FlooCast app — no phone interaction is needed to change the connection. The dongle itself handles the transition as a broadcast assistant.

Thanks very much for the link. Yes, I was able to get @ 48kHz. You might want to change the wording “Broadcast High-Quality Music” to “Broadcast 48kHz Music” (or something similar) to make this point clear.

In reply to @Ranson

Thanks very much for the receiver info; I’m listening to an Auracast broadcast right now on my Android phone !
Could you please update the Floocast app on Android to indicate the codec info – e.g., “ 24kHz” or “LC3 48kHz” or whatever ?
It would be nice to have this info displayed next to the channel before connecting, as someone might have TWO different broadcast channels with the same info, but different rates – e.g., one for 24kHz, the other for 48kHz.

Thank you for confirming and for the suggestion! It would be greatly appreciated if you could share your phone and hearing aid models in the thread where we introduced this feature — many users are looking for setups similar to their own, and your input could be really helpful to them.

Bring Auracast to Any Hearing Aids with the FlooGoo FMA120
First, I’d like to thank @d_Wooluf for introducing our FMA120 as an Auracast and LE Audio transmitter last year. Without that introduction, we might never have discovered this wonderful place to connect directly with our customers. Since we launched the FlooGoo FMA120 in November 2023 on Amazon, we’ve received tremendous feedback from early adopters of LE Audio and Auracast, especially from the hearing aid community. As with any new technology, Auracast faces some compatibility challenges, an…

There’s no with Phonak yet, still waiting for that firmware update…

Hi @PhoebeY what’s the current status of the Avantree Voyager? Does it need special firmware to use the lower bit rate for hearing aids? Or is it a menu option?
What about PIN-protected ?

Hi @wtolkien, Avantree Voyager is now available on Amazon and on avantree.com11. There are a few production batches:

  • First batch: Requires DFU firmware update to support 24Kbps for hearing aids.
  • Second batch onward: Already supports 24Kbps out of the box — no update needed.

Regarding PIN-protected : we now also support it via firmware update. You can find the latest firmware and update instructions here:
:link: Firmware Updates

Let me know if you need help checking which batch you have or updating the firmware!

In reply to @hlaanm

Thanks for asking. But unfortunately, my church hasn’t officially committed to , so probably shouldn’t list it yet. I am having trouble getting the head tech committed to it. Currently, I am taking my own transmitter to use in one of the three lesser attended venues where I occasionally run sound.

Here is response from Philips Demant Customer Service to my query about .

Hello, I want to check availability of Auracast for Hearing Aid 9050. I have latest hearing link app 8512 (1.5.2) and firmware 1.2.1.

————————-
Thank you for reaching out to Philips Hearing Solutions Consumer Care. We will be glad to support you!

The model you mentioned is Auracast ready and the feature will be available in the coming months.

You will need to perform a firmware update at the clinic that provided the devices to use the feature, and also an app update will be need.

Please, ask your audiologist to inform you when the firmware update including the Auracast feature will be available to be installed.

Related discussions